Bring the Very best in Spray Foam

The need to solve energy saving and thermal insulation problems of residential and industrial facilities led to the development of completely new materials, the mechanism of action of which is radically different from the work of classical thermal insulators.

Due to their unique qualities, liquid heat insulation, otherwise known as energy-saving heat-reflective paint or heat-painting, can have a noticeable effect in energy saving even with a layer thickness of 1 mm. The development and production of the first heat-colors was carried out for the space industry, and they partially justified themselves in this industry, and then began to be actively used in construction. Let us know more about the Spray Foam Contractors now.

What is ultra-thin liquid heat insulation?

The composition of this paint includes the following mandatory components:

Filler, which is a hollow microsphere – ceramic, glass, polymer beads of microscopic dimensions, filled with rarefied air. Fillers can differ not only in their composition, but also in the homogeneity of the fractions, their size, the ratio of the various components.

A binder made from polymers, such as acrylic or latex.

structure of liquid heat insulation

In addition to the main components, various modifications of the liquid heat-insulating material may include additives whose composition depends on the intended application. Therefore, to obtain the maximum effect from the use of liquid thermal insulation, it is necessary to take into account all of the above factors.

Principle of action of thermal paint

Heat can be transmitted in three ways:

  • Thermal conductivity, when heat is transferred from a warmer area to a colder one. Only 20% of the binder component is involved in the thermal conductivity in the heat paint.
  • In liquid thermal insulation losses for convection are insignificant, due to the fact that most of its mass is made up by hollow balls.
  • In liquid heat insulation, microscopic balls reflect and dissipate heat. Almost 90% of the reflected radiation transforms the surface into an analogue of the thermos.

Appointment of liquid insulation for facades:

Reduction of heat loss through the facade of the building and reduction of the cost of air conditioning in the summer;

  • wall insulation inside the room;
  • warming of loggias and balconies;
  • Floor and basement insulation.

Treatment with a liquid insulation of the walls from the outside and from the inside allows not only to reduce the heat loss of the building, but also to eliminate the problem of fungus formation, condensation, icing of surfaces.

Preparation of the surface of the facade should be carried out in accordance with the instructions to the material, but, most often, the treatment of the base with an acrylic primer of deep penetration is used.

According to consumers, the effectiveness of the use of heat for the entire area of ​​the facade is sometimes questioned, but its use for processing slopes and other hard-to-reach places has earned many positive responses.

Comments are closed.